The best office chairs priced $100 or less

If there’s one thing I’ve learned after working from home for nearly 25 years, it’s the importance of having a good desk chair. But does “good” have to mean “expensive”? Do you really have to spend hundreds of dollars just for a comfy place to park your keister?

I decided to find out. Armed with CNET’s credit card, I went shopping for office chairs priced $100 and less. I wanted to see if any of them could possibly compare with my current chair, a comfortable, ergonomic, highly adjustable FlexiSpot Soutien that sells for $270.

The view from the cheap seats

Here’s what I learned about cheap chairs: Compromises are to be expected. Although I was impressed with the build quality of most of my test subjects, there were only a few I’d be willing to sit on all day every day. On one chair, the wraparound arms made things uncomfortable for my legs. Another wouldn’t move smoothly on a hard surface; it dragged instead of rolling. A third simply wasn’t designed for a person of my height (6 feet).

That said, any chair gets uncomfortable after too much sitting, which is why it’s important to stand, stretch and move around on a regular basis.

Read more: Do these 5 exercises to save your posture while working from home

Something else to note: Branding can be sort of “fluid” with these cheapies. Occasionally what I received didn’t seem to match what I ordered. For example, I purchased a Smilemart mesh-back from Walmart; what arrived was marked Yaheetech. It appeared to be the correct chair, just with a different name on the box. (Another chair’s box bore no name at all.)

As for pricing, everything here is accurate at the time of this writing — but fluctuations are common. At one point, for example, the BestOffice chair was priced at $40, but it jumped to $51 shortly after the sample arrived. As of today, it’s at $42.

So, can you get a decent office chair for $100 or less? Read on to find out.

Rick Broida/CNET

This model won me over before I even sat in it, because it comes with superb instructions and color-coded screws to make assembly as easy as humanly possible. It proved one of the fastest, simplest builds in the group, and the end result was one of the comfiest chairs.

The seat is wide and thick, the back welcoming in a way that most of these chairs aren’t. Instead of overly aggressive or poorly placed lumbar support, you get a gentle curve and soft mesh. The arms are actual arms, not wraparound arcs that impede your legs.

I also appreciate the handful of color options Union & Scale offers, including blue, black and light gray. I did encounter one minor issue: One of the casters didn’t roll well on my mat. At times, moving the chair seemed more like dragging the chair.

About the price: The Essentials lists for $130, but routinely goes on sale at Staples for $70 — though at this writing it was going for $80. It’s definitely a top pick in the budget-chair category, but make sure to wait till it’s discounted.

Rick Broida/CNET

With a price tag that typically hovers in the $40 range (for the black model, anyway — there are other colors available priced higher), this is one of the cheapest chairs in the group. It’s also one of the cheapest chairs in the group, with a few flimsy and odd-fitting parts. Thankfully, the end result isn’t bad at all.

This was the only chair to give me any real trouble during assembly. During unpacking, I thought the five-arm base had arrived broken, as one arm was cut in half. Turns out you have to manually add the missing joint. Not a big deal, but from there I couldn’t get the back to line up correctly with the seat; one of them was crooked somehow, resulting in a noticeably wider gap on one side. As for the arms, I had to, well, strong-arm one of them into place. Something in the molding was slightly off.

Because the arms are L-shaped, rather than fully enclosed like on many chairs, I actually wanted to reverse their installation so my legs could sit wide. (That works, by the way; I tried it.)

The chair stands a little short, with a maximum seat height of just 20 inches — shy of where I’m comfortable as a 6-footer. But I was impressed by the unique lumbar support, which consists of vertical plastic pieces flanking the back. It’s not only an eye-catching design, but also a better feel than most. The mesh back snugs you in rather than pushes you away.

Despite a few design flaws, this chair delivers a pretty amazing value.

Rick Broida/CNET

How good can a $55 chair possibly be? Initially I’d have said, “Not very,” but this one changed my mind. It’s one of the most comfortable in the group, and you can get it in a variety of different colors (blue, purple, red, etc.) for the same price.

Also unexpected: Although Walmart’s product page indicated a Smilemart brand, the chair that arrived was clearly branded Yaheetech. This wasn’t problematic, just surprising.

The chair went together very quickly; I’d say it took me all of 10 minutes to assemble. The seat is deep and cushy, and the arms are set back far enough that your legs don’t bump them much. The arms themselves aren’t adjustable, and their narrow, hard-plastic design won’t win any awards for comfort. 

But if you don’t have a lot to spend on a desk chair, this is one of the best options out there.

Recommended with reservations

Rick Broida/CNET

Is there such a thing as a “happy” office chair? If so, it’s this one: There’s just something cheerful about the white arms and accents, which contrast nicely against the standard black seat and back. 

Assembly proved a little challenging here, in part because the deeply sunk holes in the arm pieces make it impossible to start threading bolts by hand. Plus, the oddly shaped Allen wrench is difficult to wield one-handed. I won’t say you need two people to build this, but it helps.

Much as I wanted to like this lovely chair, the plastic lumbar support made it difficult. It’s too rigid; you really feel it on your lower back. That’s unfortunate because otherwise I found it pretty comfortable. I’m also concerned that those lovely white arms will start to get grungy over time, and that even with cleaning will never reclaim their original luster.

Amazon

Where is it written office chairs have to have arms? Sure, every other chair here has them, but Amazon went its own way with this house-brand seat. If you want a place to rest your upper limbs while working, look elsewhere.

That said, this is a darn comfy chair. The cushion and seat-back are firm, with subtle, non-oppressive lumbar support. Build time was a tight five minutes (because no arms!).

However, although you can adjust the height, that’s it; there’s no tilt adjustment, probably because the legs don’t extend out far enough to accommodate any leaning. On the plus side, it has a smaller-than-average footprint, something to consider if you need a bunch of chairs to squeeze around a conference table.

But there are several seats priced the same or less that do have arms and do tilt. It just depends on what you want.

Rick Broida/CNET

This snazzy model, ostensibly a “gaming chair” but perfectly suitable for desk duty, looks like something you’d find in a race car, with striking white accents mixed in with the black. It’s one of the best-looking chairs under $100.

It’s reasonably easy to assemble, though it helps to have a second person when attaching the seat back, and it comes with plastic caps to cover the screw holes, a nice touch. The arms can pivot up and out of the way if you want more range of movement.

Curiously, the instruction manual makes reference to a massage feature that the chair doesn’t seem to have. I found no cord in the box and no place on the chair that one might plug it in.

I don’t think that would help, however, as I found the overall design uncomfortable. The built-in lumbar cushion sits too low, pushing against your tailbone rather than supporting your lower back. I also found the seat-back a bit too short (again, I’m 6 feet); it curves inward right at my shoulder blades, so leaning back feels awkward. Similarly, the included headrest cushion (which is removable) pops off if I try to position it at a comfortable height.

So while this chair scores a lot of style points, its comfort leaves much to be desired — at least if you’re my height.

Not recommended

Bad casters, bad design

Smugdesk Ergonomic Office Chair

smugdesk-ergonomic-office-chair-2

Rick Broida/CNET

Despite the Smugdesk branding on the product page, there was nothing in the box or assembly manual to indicate any branding at all. Indeed, the support email address listed is for something called “vipclub.” No problem; it was a similar story with the Smilemart chair — which, at first blush, you might easily mistake for this one.

Assembly proved quick and relatively easy, the only real challenge being a couple side screws that were a little tough to tighten owing to their position.

The chair itself is comfortable, with a lumbar-friendly mesh back and the usual tilt and height adjustments. However, the closed-loop arms are set so far forward, I frequently found my legs pressing into them, which got unpleasant after a while. What’s more, a few of the casters didn’t roll properly on my chair mat; every time I scooted forward or back, they just dragged along the surface.

With those two fairly significant marks against it, the Smugdesk chair is hard to recommend.


Lumbar loser

Essentials by OFM Model ESS-3048

ofm-essentials-ess-3048

Rick Broida/CNET

Although it’s priced just over the $100 threshold (Quill was previously selling it for $103, though it’s currently listed at $110), I decided to include this chair because it’s the only model here with a leather seat and height-adjustable arms. Seems like those few extra dollars would be money well spent, right?

Unfortunately, no. Although that seat is cushy and comfortable and the adjustable arms are a welcome amenity, the chair suffers from a major flow: an aggressive hard-plastic lumbar support. Unless you sit perfectly straight, with your back in just the right position, you’re going to feel that plastic bar — and it’s not pleasant.

Another oddity: Like all chairs, this one has a metal tilt-tension piece that installs under the seat. Unlike every other chair, that piece lacked an arrow indicating which way it should face. It wasn’t hard to figure out, but one could easily make the mistake of reversing it, then face fixing it after the fact.

But, really, it’s the awful lumbar bar that makes this chair hard to recommend.


CNET’s Cheapskate scours the web for great deals on tech products and much more. For the latest deals and updates, follow him on Facebook and Twitter. You can also sign up for deal texts delivered right to your phone. Find more great buys on the CNET Deals page and check out our CNET Coupons page for the latest Walmart discount codeseBay couponsSamsung promo codes and even more from hundreds of other online stores. Questions about the Cheapskate blog? Answers live on our FAQ page.





Source link

Leave a comment

%d bloggers like this: